1.4 HDI 16v vacuum hose diagram required

Hello people, I need your help. I need a vacuum hose diagram for Citroen c3 1.4 hdi 16v. How does it connect?

Lazar_Dunjic wrote: ↑Tue Mar 30, 2021 11:26 am Hello people, I need your help. I need a vacuum hose diagram for Citroen c3 1.4 hdi 16v. How does it connect?

Hello

Which part are you particularly interested in?

The vacuum pump

The Brake servo

The EGR valve, or its solenoid

The Turbo valve or its solenoid

The Vacuum accumulator/distributor block?

For vaccum accumulator ball

Lazar_Dunjic wrote: ↑Tue Mar 30, 2021 1:57 pm For vaccum accumulator ball

Number 3 on the diagram above.

One side is fed from the vacuum pump (the supply pipe (no.5) attaches to the underside of the accumulator (no.3))

The two outputs feed the turbo solenoid (no.1) and the EGR solenoid (also no.1).

Arfur Dent wrote: ↑Tue Mar 30, 2021 2:02 pm One side is fed from the vacuum pump (the supply pipe (no.5) attaches to the underside of the accumulator (no.3))

If the pipe (no.5) is not in its clip properly and the rubber end of the pipe is split or worn out, the pipe (no.5) can just fall off the accumulator (no.3) and you loose turbo boost.

What is this,and please tell me where is a accumulator vaccum(location)

Lazar_Dunjic wrote: ↑Tue Mar 30, 2021 3:47 pm What is this,

I don't know, it doesn't look like anything I have seen on a 1.4 HDi 16v from 2003.

Your picture looks more like something from a VW?

Lazar_Dunjic wrote: ↑Tue Mar 30, 2021 3:47 pm and please tell me where is a accumulator vaccum(location)

It is behind the engine, below the horizontal EGR pipe.

You need to remove the air filter box to access it



then find it with pipes attached between the engine and the firewall.

Thank you,you are so good man